What Is Hot Air Stenter Setting Machine | Forum

Topic location: Forum home » General » Guerilla Chat
hot stenter
hot stenter Feb 11

 

The shape of the Hot Air Stenter setting machine is similar to hot air stenter, only the heating system requirements are different so we always confuse two machines. The hot air stenter setting machine is a high temperature machine, which is different from the hot air stenter, which can’t be ignored, otherwise it will be difficult to adjust the amplitude and the deformation of the cloth edge during operation. Therefore, it should be designed in consideration of the deformation of the fabric during high temperature operation, the expansion of the guide rail, the adaptability of the amplitude modulation screw to high temperature operation, etc.

The heat setting machine is mainly composed of a feeding device, a preheating zone, a high temperature setting zone, a cooling zone and a cloth discharging device. The feeding device is made of a tension frame, a weft feeder, a suction device, an overfeeding device, an automatic control device, an edge detector, etc. The function of the feeding device is to make the fabric perpendicular to each other under a certain tension or a certain relaxed state, and can smoothly enter into the machine. Then the fabric is heated to a certain temperature through the top hot zone to avoid the cold forming fabric directly entering the high temperature setting zone and affecting the setting temperature.

The temperature of the preheating zone should be controlled at around 100℃. The preheated fabric enters into the high temperature setting zone (with steam heating and electric heating device), and the temperature is controlled at 150~230℃, so that the fabric is evenly heated for a certain time. After meeting the setting requirements, the cooling zone is cooled rapidly, and finally, the cloth is discharged. The falling cloth frame was dropped out of the Licheng Flat Screen Printing Machine. The operation of the fabric in the machine is driven by a chain of crepe chains or needle plates and fabrics. A static eliminator must be installed at the fabric outlet, or a steam vent and a metal screen should be installed in front of the fabric roller to spray a proper amount of steam on the cloth surface to appropriately increase the moisture regain of the fabric and reduce the generation of static electricity.

 

Share:

Choose Language

Chinese (Traditional)EnglishFrenchGermanHebrewHindiItalianJapaneseRussianSpanish

News

Share

Share:

Members

Blogs

AZule
nike air max australia The retro revival of Nike&r... more
AZule Yesterday, 10:01PM
AZule
pandora ireland Yesterday the business declared a ... more
AZule Yesterday, 09:59PM
AZule
nike chaussure pas cher In honor of “the bas... more
AZule Yesterday, 09:57PM

Forum Topics

lindang56
Tips For Selecting Affordable Lawn Service... More
lindang56 13 hours ago
lindang56
The number one killer of Americans Jalen... More
lindang56 13 hours ago
lindang56
For people that enjoy equestrian pursuits like... More
lindang56 13 hours ago
lindang56
I just want to show him I could do it  ... More
lindang56 13 hours ago
lindang56
Commentary by a Chinese State-run news site... More
lindang56 13 hours ago